|
|||||||||||||||||
|
DH3 Dwyer Digihelic Differential Pressure Controller$355.00 -- Digital display gage, relay control and transmitter all in onePurchase DH3 Dwyer Digihelic Differential Pressure Controller The Dwyer DH3 Digihelic� Differential Pressure Controller is a 3 in 1 instrument possessing a digital display gage, control relay switches, and a transmitter with current output all packed in the popular Photohelic� gage style housing. Combining these 3 features allows the reduction of several instruments with one product, saving inventory, installation time and money. The Digihelic� controller is the ideal instrument for pressure, velocity and flow applications,achieving a 1% full scale accuracy on ranges down to the extremely low 0.25" w.c. to 2.5" w.c. full scale. Ranges of 5" w.c. and greater maintain 0.5% F.S. accuracy. Bi-directional ranges are also available. The Series DH3 Digihelic� controller allows the selection of pressure, velocity or volumetric flow operation in several commonly used engineering units. 2 SPDT control relays with adjustable deadbands are provided along with a scalable 4-20 mA process output. Programming is easy using the menu key to access 5 simplified menus which provide access to: security level; selection of pressure, velocity or flow operation; selection of engineering units; K-factor for use with flow sensors; rectangular or circular duct for inputting area in flow applications; set point control or set point and alarm operation; alarm operation as a high, low or high/low alarm; automatic or manual alarm reset; alarm delay; view peak and valley process reading; digital damping for smoothing erratic process applications; scaling the 4-20 mA process output to fit your applications range and field calibration. DH3 SpecificationsService: Air and non-combustible, compatible gases. Wetted Materials: Consult factory. Housing Material: Die cast aluminum case and bezel. Accuracy: �1.5% for 0.25" and �0.25" w.c. ranges. Ranges 0.5" to 5" w.c. and corresponding bi-directional (except �2.5" w.c.) �1%; All other ranges: �0.5% @ 77�F (25�C) including hysteresis and repeatability (after 1 hour warm-up). Stability: < �1% per year. Pressure Limits: Ranges = 2.5" w.c.: 25 psi; �2.5", 5" w.c.: 5 psi; 10" w.c.: 5 psi; 25" w.c.: 5 psi; 50" w.c.: 5 psi; 100" w.c.: 9 psi. Temperature Limits: 32 to 140�F (0 to 60�C). Compensated Temperature Limits: 32 to 140�F (0 to 60�C). Thermal Effects: 0.020%/�F (0.036/�C) from 77�F (25�C). For 0.25" and �0.25" w.c. ranges: �0.03%/�F (�0.054%/�C). Power Requirements: 12-24 VAC/VDC. Power Consumption: 3 VA max. Output Signal: 4-20 mA DC into 900 ohms max. Zero & Span Adjustments: Accessible via menus. Response Time: 250 ms (damping set to 1). Display: Backlit 4 digit LCD 0.4" height LED indicators for set point and alarm status. Electrical Connections: 15 pin male high density D-Sub connection. 18" (46 cm) cable with 10 conductors included. Process Connections: 1/8" female NPT. Side or back connections. Mounting Orientation: Mount unit in vertical plane. Size: 5" (127 mm) O.D. x 3-1/8" (79.38 mm). Weight: 1.75 lb (794 g). Agency Approvals: CE. Switch Specifications Switch Type: 2 SPDT relays. Electrical Rating: 1 amp @ 30 VAC/VDC. Set Point Adjustment: Adjustable via keypad on face DH3 Applications � SCFM flow in ducts
� Filter status
� Static pressures in ducts or buildings
� Damper control
� Fan control
See also DH Digihelic Differential Pressure Controller DHII Digihelic Differential Pressure Controller, NEMA 4X Order accessories below: Purchase DH3 Dwyer Digihelic Differential Pressure Controller
Other products in the category Pressure Meters / Differential Pressure Controllers and Switches:
Accessories
|
||||||||||||||||
|