MC Multi-Cal Pressure Calibrator, Hand Held

$2,889.00 -- Hand Held Pressure Calibrator, +/-0.05% accuracy, Datalogging, NIST Traceable

Purchase MC Multi-Cal Pressure Calibrator, Hand Held

MC Pressure Calibrator User Manual
MC Pressure Calibrator Dimensional Drawing

Series MC Portable Multi-Cal Pressure Calibrator from Dwyer Isntruments performs a wide variety of simple and complex pressure based measurement, test, and calibration operations. Modular sensor design eanbles user to select pressure measurement range for application flexibility. The MC calibrator can accommodate up to two interchangeable pressure modules (sold separately below) in any combination of range or accuracy.

The MC Calibrator simultaneously displays two separate measurements on the two line, alphanumeric display. Readings can be displayed in a choice of seven preprogrammed engineering units or any single user-defined unit. The calibrator features min/max recall, hi/lo alarm, percentage of full scale pressure readings, mA/voltage measurement, leak rate and pressure decay measurement, switch testing capabilities, including trip point and dead band, and velocity/volume flow rates.

Quickly document calibration procedures using the data logging feature which stores up to 384 sets of pressure and time/date stamped measurements. Easily upload stored data to an IBM compatible computer via the RS232 port. Calibrators and modules include certification to NIST traceability - ideal as a secondary standard for calibrating pressure equipment.

The Multi-Cal Pressure Calibrator includes utility software, test leads, protection module, adjustable had strap, AC adapter, two 9V batteries, instruction manual, and hard carrying case.

Multi-Cal Pressure Modules are interchangeable and available in a wide selection of pressure ranges and accuracies. Dwsyer pressure calibrators MC and MC6 accept up to two pressure modules. Modules include NIST calibration certification.Modules are sold separately. See Below. Contact us for other pressure ranges and accuracies. FM-approved models are also available.

Applications:

� Clean Room Control
� Filter Performance Monitoring
� HVAC Testing and Setup
� Draft Measurement
� Airflow Measurement Control
� Differential Pressure Measurement in Laminar Flowhoods
� Paint Booths
� Industrial Ovens and Fume Hoods
� Use as a Secondary Standard for Calibrating Pressure Equipment

Specifications of MC Multi-Cal Pressure Calibrator

Service: Clean, dry, nonconductive, noncorrosive gases.

Accuracy: Differential Pressure Modules: �0.06% FS, Gauge Pressure Modules: �0.05% FS, Voltage Input: �0.025% FS @ 1/10 VDC, �0.10% FS @ 0/30 VDC, Current Input: �0.03% FS @ 1/20 mA, �0.05% FS @ 0/50 mA.

Sensitivity: �0.002% of span with dampening 1 part in 50,000 (max.).

Repeatability: Ranges ≤0/2 psi: �0.05% of span, Ranges ≥0/5 psid: �0.02% of span.

Output: RS232 serial interface, 9-pin.

Alarm Output: SPST form C 110 VDC, 120 VDC (max.), 1 A (mas.), 30 W, 62.5 VA (resistive).

Display: Alphanumeric LCD, 0.37" (9.5 mm) height per line, 2 lines, 16 characters/line.

Display Update: 100 msec.

Ambient Operation Temperature: 32 to 120�F (0 to 49�C).

Storage Temperature: -4 to 158�F (-20 to 70�C).

Process Connection: 1/8" female NPT.

Electrical Connections: Miniature recessed banana jacks.

Power Requirements: Internal: two 9 VDC alkaline batteries, External: AC adapter 9 VDC, 500 mA.

Battery Life: 30 hours (approximate).

Engineering Units: In H2O, psi, in Hg, kPa, mbar, cm H2O, m Hg, and user-defined.

Overpressure: Differential Pressure Modules: 50 psi positive direction, 15 psi negative direction, Gauge Pressure Modules: 2x range (0/5 psi to 0/1000 psi).

Temperature Compensation: 20 to 120�F (-7 to 49�C).

Temperature Error: Maximum of �0.004% of span per �F over compensated range for zero and span.

Temperature Effect Electrical Measurement: �0.001% of span per �F over compensated range.

Dampening: (Measurement averaging) programmable from 0 to 16 consecutive readings.

Baud Rate: 300, 1200, 2400, or 9600, selectable.

Housing Material: ABS plastic.

Weight: Calibrator: 2.2 lb (1.3 kg); Pressure Module: 0.5 lb (0.3 kg).

Agency Approvals: CE.

Order Pressure Modules Below

Purchase MC Multi-Cal Pressure Calibrator, Hand Held

Other products in the category Pressure Meters / Pressure Calibrators:

MC Multi-Cal Pressure Modules -- MC Multi-Cal Pressure Modules are designed for use with the Dwyer Instruments MC Handheld Pressure Calibrator or the MC6 Benchtop Pressure Calibrator. Modules are interchangeable and available in a wide selection of pressure ranges and accuracies. . . .

MC6 Multi-Cal Pressure Calibrator, Benchtop -- MC6 Pressure Calibrator Dimensional Drawing Model MC6 Multi-Cal Benchtop Calibrator performs a wide variety of simple and complex pressure based measurement, test, and calibration operations. Modular sensor design . . .

Accessories

MC Multi-Cal Pressure Modules