|
|||||||||||||||||||||||||||
|
3100 Dwyer Explosion-Proof Differential Pressure Transmitter$1,159.00 -- Explosion proof differential pressure transmitter with or without LCDPurchase 3100 Dwyer Explosion-Proof Differential Pressure Transmitter
Dwyer 3100 Explosion-Proof Differential Pressure Transmitter
HART�, Push Button
Configuration, Hart� Rangeability (100:1)
The Mercoid� Series 3100 Smart Pressure Transmitter from Dwyer Instruments is a microprocessor-based high performance transmitter, which has flexible pressure calibration, push button configuration, and is programmable using HART� Communication. The Series 3100 is capable of being configured for differential pressure or level applications with the zero and span buttons. A field calibrator is not required for configuration. The transmitter software compensates for thermal effects, improving performance. EEPROM stores configuration settings and stores sensor correction coefficients in the event of shutdowns or power loss. The Series 3100 pressure transmitter is FM approved for use in hazardous (classified) locations. The 100:1 rangeability allows the smart transmitter to be configured to fit any application. Spcifications for the 3100 Explosion-Proof Differential Pressure Transmitter
Service: Compatible gases, steam, liquids or vapors. Wetted
Materials: 316L SS.
Accuracy: �0.075% FS (@ 20�C).
Rangeability: 100:1 turn down.
Stability: �0.125% FSO/yr.
Temperature
Limits:
Process: -40 to 248�F
(-40 to 120�C);
Ambient (without
LCD): -40 to 185�F (-40 to 85�C);
Ambient (with LCD):
-22 to 176�F (-30 to 80�C).
Pressure Limits:
Max. pressure: Range:
-14.5 to 2000 psi;
Burst pressure:10000
psi.
Thermal Effect: �0.125% span/32�C.
Power
Requirements: 11.9 to 45 VDC.
Output Signal: 4 to 20 mA/HART� Communication.
Response Time: 0.12 seconds.
Damping Time: 0.25-60 seconds.
Loop Resistance:
Operation: 0 to 1500
Ohm;
HART� Communication: 250 to
500 Ohm.
Electrical
Connection: Two 1/2? female NPT conduit.
Process
Connection: 1/4? female NPT.
Display: Optional 5 digit LCD.
Enclosure
Rating: NEMA
4X (IP66) and explosion-proof for Class I, Div I, Groups A, B, C and D.
Weight: 8.6 lb.
Agency
Approvals: CE, FM.
FEATURES of the Dwyer Explosion Proof Pressure Transmitter
* Completely configurable using zero/span buttons (no calibrator required) * Rangeability
(100:1)
* High accuracy
(0.075%)
* Automatic ambient
temperature compensation
* Fail-mode process
function
APPLICATIONS for the 3100
* Flow measurement * Level monitoring
* Filter or pump
differential pressure
* Critical process
monitoringChoose from these models:
Order Accessories Below: Purchase 3100 Dwyer Explosion-Proof Differential Pressure Transmitter
Other products in the category Pressure Meters / Explosion-Proof Pressure Transmitters:
Accessories
Home | Air Flow / Anemometers | Water Quality Meters | Pressure Meters | Gas Detectors | Accessories | Shop by BRAND | Hygrometers | Thermometers | Moisture Meters | Particle Counters | Data Loggers | Vibration Meters | Air Flow / Tracer Smoke | Thermal Imaging Cameras | Light Meters | Sound Meters | Tachometers & Strobosopes instruments that measure and datalog temperature, humidity, airflow, pressure, gases, light, RPM, pH, weight, water quality, weather MeterMall USA Shopping Cart Software by Nexternal |
||||||||||||||||||||||||||
|