A-286 Panel Mount Flange for Magnehelic Gage

$10.95 -- Panel Flange for mounting Magnehelic® gages in panels

Purchase A-286 Panel Mount Flange for Magnehelic Gage

A-286 Panel Mounting Flange for 4-1/2" Diameter Dwyer Magnehelic Gages

 

     The new mounting flange can be used on any Dwyer Instruments, Inc. gage that possesses a 4-1/2" (115 mm) diameter housing. The flange is secured to the gage behind its bezel with three setscrews. The setscrews hold the gage tight in place. The gage/flange can then be quickly attached to a surface or panel with a drill and the supplied mounting screws. The flange's three mounting holes follow the industry standard mounting pattern. The flange is made of a robust plastic composite and comes with three pre-installed setscrews, an Allen wrench for tightening and three flange mounting screws.

A-286 Kit includes:

(1) Flange
(3) Pre-installed metal set screws
(3) Mounting screws
(1) Allen wrench
(1) Instruction manual with mounting template

Purchase A-286 Panel Mount Flange for Magnehelic Gage

Other products in the category Accessories / Dwyer Accessories:

351-9 Dwyer RS-232 to RS-485 converter -- The Mother NodeT Communication Signal Converter line of RS-232 to RS-485 converters offers an easy way to use virtually any PC to communicate with half duplex RS-485 devices. Complicated hand-shaking issues are eliminated with these easy to use

A-201 Tubing for Portable Digital Manometers -- Rubber tubing, 3/16" ID, 9 ft length. Use with Dwyer hand-held digital manometers: 475, 478A, 477, and 477A.

A-266 Dwyer Digihelic Controller mounting bracket -- Surface mounting bracket.  Use with Dwyer DH series digital differential pressure controllers and other Dywer differential pressure instruments

A-286 Panel Mount Flange for Magnehelic Gage -- A-286 Panel Mounting Flange for 4-1/2" Diameter Dwyer Magnehelic Gages        The new mounting flange can be used on any Dwyer Instruments, Inc. gage that possesses a 4-1/2" (115 mm) diameter housing. The flange is

A-298 Flat Flush Mount Bracket for Dwyer Capsuhelic -- Flat aluminum bracket for flush mounting Capsuhelic® gage

A-299 Mounting Bracket for Magnehelic Gage

A-300 Flat Mounting Bracket for Magnehelic Gage

A-301 Static Pressure Tip -- Static pressure tip for 1/4" metal tubing connectionUse with Dwyer Dwyer DH series digital differential pressure controllers and other Dywer differential pressure instruments

A-302 Static Pressure Tip -- Static pressure tip for 3/16" and 1/8"" plastic or rubber tubingUse with Dwyer DH series digital differential pressure controllers and other Dywer differential pressure instruments

A-302F-A Static Pressure Tip -- Static pressure tip with mounting flange, 4" hook style.  For 3/16" ID rubber or plastic tubing, includes mounting screwsUse with Dwyer DH series digital differential pressure controllers and other Dywer differential pressure instruments

A-308 Static Pressure Fitting for Magnehelic Gage -- A-308 Static pressure fitting for Dwyer magnehelic gauges. Hose barb Fits 3/16" and 1/8" ID plastic or rubber tubing.

A-309 3-Way Manifold Valve for Dwyer Capsuhelic -- A-309 3-Way Manifold Valve for Dwyer Capsuhelic gage

A-310A 3-Way Valve for Magnehelic Gage

A-314 Bleed Fitting for Dwyer Capsuhelic -- A-314 Bleed Fitting for Dwyer Capsuhelic gage.  Affords easier, safer purging of trapped air when using a Capsuhelic® gage with liquids.  Also useful for draining condensate when installed in lower ports.  To open, simply loosesn the h

A-320-B Static Pressure Tip -- Series A-320 Instrument Enclosure protects instruments in all applications. The weatherproof enclosure is water tight and corrosion resistant. Weatherproof enclosure for 3000MR Photohelic® Switch/Gage, Series 605 Magnehelic® Differential Pressure Tr

A-321 Safety Relief Valve for Magnehelic Gage

A-370 Mounting Bracket for Dwyer Capsuhelic -- A-370 Mounting bracket.  First, flush-mount the Capsuhelic® gage in the bracket, then mount the bracket to a vertical surface. Steel with gray hammertone epoxy finish.

A-402A Zippered Carry Case for Digital Manometers -- Tough gray nylon pouch protects any Series 475, 476A, 478A, 477, 477A or 490 Dwyer Digital Manometer . Double zippered for quick and easy access. With belt loop that snaps closed.  Dimensions:  7-1/2½H x 3½W x 2-1/4½D (191 x 76 x 57

A-432 Portable Kit for Magnehelic Gage

A-438 Dwyer mounting bracket for DHII -- Surface mounting bracket.  Use with Dwyer DHII series digital differential pressure controllers.

A-464 Flush Mount Kit for Magnehelic Gage -- The A-464 Mounting Kit provides a flush mounting solution for Magnehelic® gage installations for applications such as clean rooms and mechanical equipment rooms. The A-464 can also be used as an alternative means to flush mount Magnehelic® gages on c

A-471Portable Kit for Dwyer Capsuhelic -- For portable operation, the A-471 Capsuhelic® Portable Gage Kit is available complete with tough polypropylene carrying case, mounting bracket, 3-way manifold valve, two 10' high pressure hoses, and all necessary fittings.

A-480 Plastic Static Pressure Tip -- Plastic static pressure tip for use with DigiMag DM-1000 series pressure and flow gauges.

A-481 Installer Kit -- Installer Kit, includes two plastic static pressure tips and 7 ft PVC tubing for use with DigiMag DM-1000 series pressure and flow gauges.

A-489 Static Pressure Tip -- Straight static pressure tip with flange, in three lengths: Model A-489, 4"Model A-491, 6"Model A-493, 8"Use with Dwyer Dwyer DH series digital differential pressure controllers and other Dywer differential pressure instruments

A-496 Heavy Duty Flush-Mount Bracket for Dwyer Capsuhelic -- A-496 Heavy Duty Flush-Mount Bracket for Dwyer Capsuhelic® gages.  Use in high-shock or high vibration applications

A-605 Air Filter Kit for Magnehelic Gage

A-610 Pipe Mounting Kit for Dwyer Gages -- Conplete bracket assembly for permanently mounting Dwyer Magnehelic® and Capsuhelic® gages to pipes from 1-1/4" to 2" diameter.

A-630 SS Angle Bracket -- Stainless steel angle type bracket with stainless steel bolts for mounting Dwyer 3100 series Explosion-Proof Differential Pressure Transmitters.

A-631 SS Flat Bracket -- Stainless steel flat type bracket with stainless steel bolts for mounting Dwyer 3100 series Explosion-Proof Differential Pressure Transmitters.

A-700 Power Supply -- Dwyer A-700 Power Converter User Manual Model A-700 Power Supply is an economical and reliable power supply suitable for powering all Dwyer pressure, temperature or air velocity transmitters. Inexpensive, open-frame design allows convenient access

-B Brass Case option for Dwyer Capsuhelic water application -- Brass Case for Dwyer Capsuhelic gage.  Required for water and water-based liquids.  

BBV-1F Flanged 3-valve block manifold -- BBV-1F Flanged 3-valve Block Manifold for Dwyer 3100 Series Explosion-Proof Differential Pressure Transmitters.     The series BBV-1 Block Manifold can be used over a broad range of industrial applications including oil refine

BBV-22F Flanged 5-valve block manifold -- BBV-22F Flanged 5-valve Block Manifold for Dwyer 3100 Series Explosion-Proof Differential Pressure Transmitters. Series BBV-2 Block and Bleed Manifold is ideal for use over a broad

DIGIHELIC LINKS communication software --      The Digihelic LinksT Communications Software is an easy to use Windows® based program. Data logging and graphing can be set up by the individual control with varying logging periods. Event logging, live inst

DM-1200 Air Flow Option for DigMag Gage -- The airflow option enables the Dwyer DigiMag DM-1000 differential pressure gage to report air velocity and volumentric flow.Air velocity and flow readings are based upon standard dry air conditions with an ambient temperature of 70°F and a barometr

HM28-0 1/8" NPT adaptor

HM28-1 Communication software and cable

HM28-2 Universal power adaptor

HM35-1 Communication Software and Cable

HM35-2 Infrared RS232 Serial Adaptor

HM35-3 External Universal Power Adapter.

HM35-PK Gas Pressure Maintenance Kit

HM35-VK Vacuum Pressure Maintenance Kit

MN-1 Dwyer MiniNode RS485 to USB Converter -- MN-1 Signal Converter User Manual The Model MN-1 Mini-NodeT Communication Signal Converter is a low cost device that converts half duplex RS-485 serial communications signals into a signal that can be read by any computer with a USB port. The integr

NIST Certificate for Dwyer Meters -- N.I.S.T.-traceable certificate of calibration for Dwyer instruments and gages.   Lead time 1 to 2 weeks.

NISTCAL-PG1 -- Have your Dwyer Digihelic DH series and DH3 series differential pressure controllers NIST calibrated by Dwyer Instrument's accredited calibration laboratory.  Less than 1 week lead time.

-SP LED Setpoint Indicator for Magnehelic Gage --      SP Indicator Product SheetSP Indicator Dimensional Drawing LED Setpoint Indicator for Dwyer Magnehelic® Gages   The bright-red LED located on the scale face clearly indicates positive, negative or differential pre



Home | Data Loggers | Air Flow / Anemometers | Water Quality Meters | Pressure Meters | Gas Detectors | Accessories | Hygrometers | Thermometers | Moisture Meters | Particle Counters | Air Flow / Tracer Smoke | Vibration Meters | Shop by BRAND | Light Meters | Sound Meters | Tachometers & Strobosopes





Instruments that measure and datalog temperature, humidity, airflow, pressure, gases, light, RPM, pH, weight, water quality, weather
MeterMall USA Shopping Cart Software by Nexternal